Abstract:
Lower Acacus Member is one of the main reservoirs in the Ghadames Basin and it is composed
of alternation sandstone and shale facies. It is characterized by low resistivity multiple stacked
pays, making the hydrocarbon detection task difficult. To date, no real procedure has been
found to correctly define the hydrocarbon in low resistivity intervals. Gas layers as an example
could be defined using density and neutron cross-over, but in shaly sand reservoirs as in this
case, the shale effect on the neutron log measurement is opposite to the gas effect making the
detection of the gas zone by cross-over not valid. On the other hand, the sonic log is affected by
the gas by decreasing the rock density, which leads to overestimation of porosity. This phenomenon shall help diagnose the gas presence in low resistivity reservoir. Using color editor of
petrophysical software enables the subdivision of log curves into horizontal intervals with specific color or shade based on certain values. Intervals with DT (90-100 msec/ft), which corresponding to 25-36% porosity unit, are shaded red. Comparing production test results with high
porosity zones (red shaded on logs) proved that they are gas producers. The advantage of this
procedure is that it does not need any extra measurement or calculation; it is only a way of
displaying the logs. It has been applied to different gas wells in Ghadames Basin, and it shows
a good result. However, this procedure is not applicable to oil pays. 1
